Toughstake™ Sand Stakes for Tents utilizes new and innovative patented technology for anchoring Tents in Sand. The Toughstake™ Sand Stake for Tents is designed to handle large wind loads normally found in desert and beach areas. Historically, tents are staked in the sand only to have the wind continually work the stakes free from the ground. This usually results to your tent blowing away to never be found again. All current Sand Stakes for Tents work in the exact same manner. The guy lines of the tent or rainfly are attached to the top of the stake. Over time, and with little force, the wind will work the Sand Stake out of the sand. Other manufacturer’s Sand Stakes have tried to solve this problem by either a large wing shaped object, a screw auger, nylon bags of sand, or increasing the length. Each of these designs is futile when experiencing high wind loads. In addition, the weight and bulk of standard stakes prohibits them from easily being stored and packed. Toughstake™ Sand Stakes for Tents is the ultimate solution for this century old problem.
With the patented Stake and Guy line system, Toughstake™ has solved the problem of stake "pull out" in sand. With over 10 times the holding force of normal Sand Stakes, the Toughstake™ Sand Stake for Tents exceeds all expectations. Once the Toughstake™ Sand Stake for Tents has been set in the sand, you have a permanent anchor point to secure your tent’s guy-lines. In addition to the maximum holding force of the Toughstake™ Sand Stake for Tents, the design incorporates low weight (only 1.18 oz / 33.4 g), and ease of packing. As anyone who has every backpacked and are weight conscious, normal sand stakes are too heavy and bulky to pack in your backpack. Each Toughstake™ is design to have the guy-line detached from the stake. This allows the Sand and Snow Stakes to easily nest together for convenient storage.
The Small Toughstake™ for Sand is the ultimate Sand Stake for Tents.